Cause analysis on the possible causes of cylinder liner wear of ceramics-Supply-Dezhou Changhong Machinery Manufacture Co., Ltd
Dezhou Changhong Machinery Manufacture Co., Ltd
Contact person: Chang Li
Mob:+86 18562150128
Fax: 0534-2358517
Email:mudpumpparts@163.com
Address: NO.6 Kehai Road Tianqu Industrial Zone Dezhou Shandong China

Position:Index > Supply

Cause analysis on the possible causes of cylinder liner wear of ceramics

News sources:[content:source]   Release time:[content:date]   Views:[content:visits]

Ceramic liner is one of the main part of the combustion chamber, sometimes small parts also plays a big role. now renumbered as you introduce the causes of abnormal wear of the cylinder liner.
1. the upper portion of the cylinder wear:-associated with the inhalation of large amounts of dust or severe carbon should maintain or replace air filter, remove the carbon, and check for channeling oil.
2. cylinder worn in the lower part: engine oil contains a lot of metal wear debris or dust, clean oil should be replaced.
3. cylinder worn in the Middle: with engine cold cold boot on corrosive wear and frequent relevant, should check the cooling system.
4. the first check point on serious wear of piston rings: indicate engine overheating, heat is not good, you should check the cooling system, ignition system (including spark plug selection), and check that the connecting rod big end bearing is loose.
Previous:没有了!Next:-Mounted dual-mounted metal liner

Other Related Products

Index | About | Product | News | Supply | Certificate | Sales network | Contact us | | top | seo:
Copyright 2012 Dezhou Changhong Machinery Manufacture Co., Ltd - All rights reserved.

幸运28 秒速时时彩官网 江苏快3 北京赛车营业时间 安徽快3 幸运28 北京赛车开奖走势图 北京赛车时间表 北京赛车营业时间 北京赛车高倍率平台